Environmental Monitoring - using diode-laser-based spectroscopic techniques
Author
Summary, in English
Monitoring of environmental gases is necessary to understand the complex processes governing global warming and the impact of pollutant emissions related to human activity. Diode-laser-based spectroscopic techniques, being robust and affordable, have a great potential to become an industrially well-established technology for environmental sensing. This thesis deals with the further development of these techniques, demonstrated in several applications to atmospheric gas detection and sensing.
The accessible spectral range of tunable diode lasers was extended by use of sum-frequency generation. High-resolution ultraviolet spectroscopy of mercury isotopes around 254 nm was performed on low-pressure cells as well as at atmospheric pressure. Ultraviolet radiation around 300 nm, utilized for monitoring of sulfur dioxide and studies of the pressure dependence of the absorption spectrum, was produced using a sum-frequency generation scheme employing a blue and a near-infrared diode laser.
Detection sensitivity was improved by several orders of magnitude by employing frequency modulation techniques. This was demonstrated with blue continuous-wave diode lasers in measurements on ground state potassium atoms, and lead atoms in very weakly populated meta-stable states. In the red spectral region, traffic-generated emission of nitrogen dioxide was monitored in situ using long path absorption at a wavelength around 635 nm.
A new temporal gas-correlation scheme was developed, which overcomes the intrinsic multimode and mode-jump behaviour of diode lasers. The concentration of a gas under study is determined by temperature tuning the wavelength of a diode laser across an absorption band of the gas, and by simultaneous temporal correlation of the detected signal with the signal from a known reference gas concentration. No knowledge of the exact spectrum is needed. The method was tested in diffusion related measurements.
A novel technique for analysis of free gas in scattering media by use of absorption spectroscopy, GASMAS, was introduced. The sharp absorption features of the gas, contrasted to the very slow wavelength dependence of the bulk material, can be picked up by use of modulation techniques. Dispersed molecular oxygen embedded in various natural and man-made porous materials was detected and measured. The gas concentration was determined by combining absorption and time-resolved laser spectroscopy measurements. Investigations were performed to assess the internal gas pressure and gas diffusion characteristics.
A new single-aerosol particle detector using a coupled-cavity diode laser was developed. Simultaneous size and shape determination was demonstrated by recording of the optical extinction and a diffraction image in the near-forward scattered light.
The accessible spectral range of tunable diode lasers was extended by use of sum-frequency generation. High-resolution ultraviolet spectroscopy of mercury isotopes around 254 nm was performed on low-pressure cells as well as at atmospheric pressure. Ultraviolet radiation around 300 nm, utilized for monitoring of sulfur dioxide and studies of the pressure dependence of the absorption spectrum, was produced using a sum-frequency generation scheme employing a blue and a near-infrared diode laser.
Detection sensitivity was improved by several orders of magnitude by employing frequency modulation techniques. This was demonstrated with blue continuous-wave diode lasers in measurements on ground state potassium atoms, and lead atoms in very weakly populated meta-stable states. In the red spectral region, traffic-generated emission of nitrogen dioxide was monitored in situ using long path absorption at a wavelength around 635 nm.
A new temporal gas-correlation scheme was developed, which overcomes the intrinsic multimode and mode-jump behaviour of diode lasers. The concentration of a gas under study is determined by temperature tuning the wavelength of a diode laser across an absorption band of the gas, and by simultaneous temporal correlation of the detected signal with the signal from a known reference gas concentration. No knowledge of the exact spectrum is needed. The method was tested in diffusion related measurements.
A novel technique for analysis of free gas in scattering media by use of absorption spectroscopy, GASMAS, was introduced. The sharp absorption features of the gas, contrasted to the very slow wavelength dependence of the bulk material, can be picked up by use of modulation techniques. Dispersed molecular oxygen embedded in various natural and man-made porous materials was detected and measured. The gas concentration was determined by combining absorption and time-resolved laser spectroscopy measurements. Investigations were performed to assess the internal gas pressure and gas diffusion characteristics.
A new single-aerosol particle detector using a coupled-cavity diode laser was developed. Simultaneous size and shape determination was demonstrated by recording of the optical extinction and a diffraction image in the near-forward scattered light.
Department/s
Publishing year
2004
Language
English
Publication/Series
Lund Reports in Atomic Physics
Volume
LRAP-329
Full text
Document type
Dissertation
Publisher
Atomic Physics, Department of Physics, Lund University
Topic
- Atom and Molecular Physics and Optics
Keywords
- Diode-laser spectroscopy
- frequency-modulation spectroscopy
- frequency conversion
- diffraction
- scattering
- Electromagnetism
- acoustics
- akustik
- optik
- absorption spectroscopy
- Elektromagnetism
- optics
- Fysicumarkivet A:2004:Somesfalean
Status
Published
Supervisor
- Stefan Andersson-Engels
ISBN/ISSN/Other
- ISSN: 0281-2762
- ISBN: 91-628-6286-3
Defence date
26 November 2004
Defence time
13:15
Defence place
Fysiska institutionen, Hörsal B, Lunds Tekniska Högskola
Opponent
- Frank Tittel (Prof)