Diffraction-limited storage-ring vacuum technology.

Summary, in English

Some of the characteristics of recent ultralow-emittance storage-ring designs and possibly future diffraction-limited storage rings are a compact lattice combined with small magnet apertures. Such requirements present a challenge for the design and performance of the vacuum system. The vacuum system should provide the required vacuum pressure for machine operation and be able to handle the heat load from synchrotron radiation. Small magnet apertures result in the conductance of the chamber being low, and lumped pumps are ineffective. One way to provide the required vacuum level is by distributed pumping, which can be realised by the use of a non-evaporable getter (NEG) coating of the chamber walls. It may not be possible to use crotch absorbers to absorb the heat from the synchrotron radiation because an antechamber is difficult to realise with such a compact lattice. To solve this, the chamber walls can work as distributed absorbers if they are made of a material with good thermal conductivity, and distributed cooling is used at the location where the synchrotron radiation hits the wall. The vacuum system of the 3 GeV storage ring of MAX IV is used as an example of possible solutions for vacuum technologies for diffraction-limited storage rings.

• Author: Eshraq Al Dmour; Jonny Ahlbäck; Dieter Einfeld; Pedro Fernandes Tavares; Marek Grabski
• Department/s: MAX IV Laboratory
• Publishing year: 2014
• Language: English
• Pages: 878-883
• Publication/Series: Journal of Synchrotron Radiation
• Volume: 21
• Issue: Pt 5
• Links: http://dx.doi.org/10.1107/S1600577514010480
• Document type: Journal article
• Publisher: International Union of Crystallography
• Topic: Accelerator Physics and Instrumentation
• Status: Published
• ISBN/ISSN/Other: ISSN: 1600-5775