The browser you are using is not supported by this website. All versions of Internet Explorer are no longer supported, either by us or Microsoft (read more here: https://www.microsoft.com/en-us/microsoft-365/windows/end-of-ie-support).

Please use a modern browser to fully experience our website, such as the newest versions of Edge, Chrome, Firefox or Safari etc.

Numerical modelling of resolution and sensitivity of ERT in horizontal boreholes

På svenska

Author

Summary, in English

Resistivity in horizontal boreholes can give useful detailed information about the geological conditions for construction in rock, i.e. in front of a tunnel bore machine. This paper is an attempt to identify a suitable methodology for an effective measuring routine for this type of geophysical measurements under actual construction site conditions. Prior to any measurements numerical modelling was done in order to evaluate the resolution of different electrode arrays. Four different arrays were tested; dipole-pole, cross-hole dipole-dipole, cross-hole pole-tripole and multiple gradient array. Additionally the resolution of a combination of cross-hole dipole-dipole and multiple gradient was assessed. The 2D sensitivity patterns for various arrangements of the cross-hole dipole-dipole and multiple gradient array were examined. The sensitivity towards inaccurate borehole geometry and the influence of water in the boreholes were also investigated. Based on the model study the cross-hole dipole-dipole array, multiple gradient array and a combination of these were found to give the best result and therefore were used for test measurements in horizontal boreholes. The boreholes were 28.5 m long and drilled 6.5 m apart. Prototypes of semi-rigid borehole cables made it possible to insert multi electrode cables in an efficient way, allowing fast measurement routines. These measurements were then studied to determine their accuracy and applicability. The results showed a high resistivity rock mass at the site. A transition from high resistivity to slightly lower resistivity coincides well with a change in lithology from gneiss-granite to gneiss. It is likely that the shotcrete on the tunnel wall is seen as a low resistivity zone. The measurements are a valuable tool, but further development of the cables and streamlining of measuring routines have to be performed before the resistivity tomography can be used routinely in pilot holes during construction in rocks. (C) 2010 Elsevier B.V. All rights reserved.

Publishing year

2010

Language

English

Pages

245-254

Publication/Series

Journal of Applied Geophysics

Volume

70

Issue

3

Document type

Journal article

Publisher

Elsevier

Topic

  • Geotechnical Engineering

Keywords

  • Water filled boreholes
  • Non-parallel
  • patterns
  • 2D sensitivity
  • Arrays
  • Numerical modelling
  • ERT
  • Horizontal boreholes

Status

Published

ISBN/ISSN/Other

  • ISSN: 0926-9851